HP LaserJet Pro 500 Color MFP M570 - Manual (Page 190)

8. If paper is visible entering the bottom of the
fuser, gently pull downward to remove it.
CAUTION: Do not touch the rollers on the
transfer roller. Contaminants can affect print
quality.
9. Paper could be jammed inside the fuser where it
would not be visible. Grasp the fuser handles, lift
up slightly, and pull straight out to remove the
fuser.
CAUTION: The fuser can be hot while the
product is in use.
10. Open the jam-access door (callout 1). If paper is
jammed inside the fuser, gently pull it straight up
to remove it (callout 2). If the paper tears,
remove all paper fragments.
CAUTION: Even if the body of the fuser has
cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they have
cooled.
1
2
176 Chapter 9 Solve problems ENWW