HP XP P9500 Storage - Manual (Page 70)

Exporting pair information to a text file
Procedure 19 To export pair information to a text file
1. In Remote Web Console, click Actions > Remote Copy > Continuous Access Synchronous >
Pair Operation.
2. Change to Modify mode by clicking the icon.
3. In the Pair Operation window, click Display Filter, select the information that you want to
export, and click Set. The Pair Operation window re-displays with the filtered columns
displayed.
4. Click Export.
5. A message appears asking whether you want to save the information in a file. Click Yes.
6. A window appears prompting you to save the file. Browse to the location where you want to
save the file, enter the name of the file, and click Save.
7. A message appears when Continuous Access Synchronous finishes saving the file. Click OK.
Example of an exported text file
The following shows an example of an exported text file. Fields above red numbers are described
in the table that follows..
(2) Group number and host group name (1) Port number in the local storage system
(4) LDKC, CU, and LDEV numbers in the local storage system (3) LU number in the local storage system
(6) Serial number of the paired storage system (5) Pair status
(8) Port number of the paired volume (7) CU SSID or Path Group ID of the paired system
(10) LU number of the paired volume (9) GID of the paired volume
(12) Pair type (11) LDKC, CU, and LDEV numbers of the paired system
(14) Differential data setting (13) Fence level
(16) Copy priority (15) Consistency group number
(18) Quorum disk ID (17) Synchronization of pair volumes
(20) CLPR number and name (19) Volume access status
70 Monitoring and maintenance