HP XP P9500 Storage - Manual (Page 72)

5. In the RCU Option dialog box, change the options as desired. Refer to steps related to the
RCU Option dialog box in the procedure,
Configuring storage systems, defining logical paths
(page 48) .
Adding, deleting SSIDs for an RCU
When new LDEVs are added to the RCU, you make them available for Continuous Access
Synchronous operations by adding the associated SSIDs.
When an LDEV is deleted from an RCU, delete the associated SSID from the RCU in Continuous
Access Synchronous to avoid mis-operation.
Prerequisite information
•
You can add three SSIDs to each Continuous Access Synchronous secondary system.
•
Before adding an SSID, make sure that the data path is properly installed.
•
Adding SSIDs is not available for CU Free.
•
Before deleting an SSID, make sure that the remaining SSIDs are still valid. Otherwise, the
data paths will be lost.
Procedure 22 To add or delete SSIDs
1. In Remote Web Console, click Actions > Remote Copy > Continuous Access Synchronous >
RCU Operation.
2. Change to Modify mode by clicking the icon.
3. In the Display box, click the MCU&RCU.
4. In the tree, click the appropriate CU, then click the desired RCU. Alternatively, select the RCU
in the list, right click, and then click Edit SSID(s) & Path(s). All SSIDs to the selected RCU are
listed.
5. To add:
a.
In the list area, right-click the Path and then click Add SSID.
b. In the Add SSID dialog box, type the new SSIDs and then click Set.
6. To delete
a.
In the list area, right-click the SSID and then click Delete SSID.
b. Click OK when the confirmation message appears.
7. Click Apply.
Deleting Continuous Access Synchronous
You can delete the Continuous Access Synchronous relationship between one or more secondary
systems (RCUs) and a primary system.
Prerequisite information
•
All Continuous Access Synchronous pairs must be deleted.
•
All logical paths will be deleted when the relationship is deleted.
•
Deleting the Continuous Access Synchronous relationship with a remote system does not affect
the Continuous Access Synchronous operations between other primary system CUs and that
secondary system.
•
After a secondary system is deleted, you can reconfigure the data path to add another
secondary system (RCU) to the primary system, or you can remove the data path and
reconfigure the primary system ports (initiator ports to ordinary target ports for fibre) to provide
additional host channels for the primary system.
72 Monitoring and maintenance