HP TopTools - Manual (Page 14)

HP Toptools for Unicenter User Guide
2.2 Step-by-Step Instructions
The Toptools server bridge component is installed on the Toptools system. It must be installed prior to installing the
platform bridge component.
The Toptools server bridge component installation process consists of the following:
1. Verify that the Toptools server is operational. (Refer to Section 1.)
2. Install the Toptools server bridge component on the Toptools server.
2.2.1 Installation
To install the server bridge component, go to the Enterprise\Tt4tng\SrvrBrdg directory and run Setup.exe. You will
see the following screen:
Figure 2-1. Opening screen of installation program for Toptools Server bridge component.
After a few moments, the license agreement screen is displayed as shown below. Notice that the version number for
the HP Toptools Server Bridge, the Toptools Server bridge component, is displayed.
Page 14