HP TopTools - Manual (Page 19)

HP Toptools for Unicenter User Guide
Figure 2-8. The Toptools Server bridge component uses a background process called "HPTTSrvbrg.exe".
Second, this process should be listed as one of the Toptools services managed by the RViewSCM.exe manager, a
Toptools server process called the Service Control Manager. You can verify this by launching a console session
directly to Toptools. (As indicated by an icon on the workspace of the system running the Toptools server, or by
launching IE with the URL http://<Toptools_Server_IP address>/hptt.) From the main screen shown by the
browser, select Settings->Toptools Services and verify the status of the Toptools server bridge as shown in the
following figure.
Figure 2-9. The Toptools Services window displays the status of the Toptools Server Bridge.
The Toptools server bridge background task should be “Active” and the current activity should be “Bridge running
normally”. Reboot is not required, but recommended.
Page 19