HP TopTools - Manual (Page 28)

HP Toptools for Unicenter User Guide
The installation wizard completes by displaying this final screen:
Figure 3-12. The platform bridge component will finish by requesting a reboot.
This screen indicates that the installation wizard has completed successful. A reboot is required for proper
operation. Installation is complete.
Note: If you integrate new components into your Toptools server, such as HP Web JetAdmin or Toptools for Hubs
and Switches, you must uninstall and then reinstall the platform bridge component in order for these new
capabilities to be recognized in the Unicenter console.
3.2.1 Configuring DSM
The following examples will demonstrate configuring DSM (Distributed State Machine) to manage Netservers.
However, it is necessary to perform the same steps for other HP device classes, in particular the DSM policies. The
following example illustrates selecting (ex. HP JetDirect Agents, HP RMC agents, or HP NSA agents) agents for
DSM to monitor.
Launch the DSM wizard by invoking
Start->Programs->Unicenter Agent Technology->DSM Wizard .
Continue to the screen shown in the following figure:
Page 28