HP TopTools User Manual
Page 59
HP Toptools for Unicenter
User Guide
The HP Toptools Remote Control card uses both SNMP and webagent technology. When selecting the item HP
Toptools Properties, the browser request is sent to the Toptools server which then redirects the request directly to the
card’s webagent. If you have configured a user account and password, you will be prompted for this information
before being able to access configuration pages or, for example, power down the server.
Figure 5-24. HP RMC Card Property Page.
Card events are managed through DSM. Like the server, a new agent is added to Unispace that may also be
browsed through NodeView.
Figure 5-25. HP RMC Card Unispace.
To reset the status of the HP RMC Agent, follow the same instructions provided in section 5.5 on resetting agent
status.
Page
59