HP ProLiant DL740 Server - Manual (Page 122)

Installing Hardware Options, Hot-Plug
Hot-Plug SCSI Hard Drive LED Indicators
The hot-plug SCSI hard drive LEDs, located on each physical drive, are visible on
the front of the server or external storage unit. They provide: (1) Activity,
(2) Power/Online, and (3) Fault status for each corresponding drive when configured
as part of an array and attached to a powered-on controller. Their behavior may vary
depending on the status of other drives in the array.
Figure 5-9: Hot-Plug SCSI hard drive LEDs
For additional information about troubleshooting hard drive problems, refer to the
HP Servers Troubleshooting Guide.
CAUTION: Before removing any hot-plug hard drive, read the important guidelines
in the following two sections.
HP ProLiant DL740 Server User Guide 5-23
HP CONFIDENTIAL
Writer: Anna Roberts File Name: f-ch5 Installing Hardware Options Hot-Plug.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:09 PM