HP ProLiant DL740 Server - Manual (Page 58)

Installing the Server in a Rack
4. Using a pencil, mark the locations on the rack where you insert the rack rail tabs.
5. On the rack, mark the top and bottom edges of the template . This step helps you
align a template for the next component.
6. Move to the rear of the rack and turn the template over so you can use the
backside of the template.
7. Repeat steps 2 through 5 with the back of the template on the rear of the rack.
IMPORTANT: On the rear of the rack, make pencil marks on the inside of the vertical
rails. These markings guide you in installing rack rails in the interior of the rack frame.
8. Remove the template from the rack.
HP ProLiant DL740 Server User Guide 2-15
HP CONFIDENTIAL
Writer: Anna Roberts File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:00 PM