HP ProLiant DL740 Server - Manual (Page 65)

Installing the Server in a Rack
3. Use two people to lift the server by its four lift handles (1) and carefully align the
open ends of the server rails on the rear of the server with the extended bearing
brace and inner slide rail of the rack rail assemblies (2).
4. Insert the server rails into the extended inner slide rails on both sides, and then
slowly slide the server into the rack. Continue sliding the server backward until
the rail-release levers engage the rack rail assemblies (3).
Figure 2-8: Loading the server onto the rack rails
CAUTION: Keep the server parallel to the floor when sliding the server rails into the
standard rack rails. Tilting the server up or down can damage the rails.
2-22 HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:00 PM