HP ProLiant DL740 Server - Manual (Page 268)

G
System Battery
This appendix provides information about the ProLiant DL740 server system battery.
Internal Battery
To remove the internal battery:
1. Shut down the operating system in an orderly manner as directed in the operating
system instructions.
2. Place the computer in standby mode and disconnect the power cords (refer to
Chapter 7).
3. Open the top access panels.
4. Locate the battery on the host board, as shown in Figure G-1.
5. Pull the battery out of the battery socket.
6. Reverse steps 1 through 5 to replace the battery.
HP ProLiant DL740 Server User Guide G-1
HP CONFIDENTIAL
Writer: Anna Roberts File Name: q-appg System Battery.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:42 PM