Power cables, Power cables -3 – HP ProLiant DL740 Server User Manual
Page 158
Cabling the Server
Power Cables
WARNING: To reduce the risk of electric shock or damage to the equipment:
•
Install the power supply before connecting the power cord to the power
supply.
•
Unplug the power cord before removing the power supply from the server.
•
If the system has multiple power supplies, disconnect power from the
system by unplugging all power cords from the power supplies.
•
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the network interface
card (NIC) receptacles.
The ProLiant DL740 server comes equipped with a bracket to secure the power cords
in the AC inlets.
HP ProLiant DL740 Server User Guide
6-3
HP CONFIDENTIAL
Writer: Anna Roberts File Name: g-ch6 Cabling the Server.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:14 PM