HP ProLiant DL740 Server - Manual (Page 262)

Troubleshooting Information
Table E-5: Are either of the Processor Board attention LED’s located on the front
bezel illuminated?
continued
Status Action
Processor board 2 attention LED is illuminated
and processor board 1 is installed. • Check the interconnect LEDs on the front
top edge of the power and media module to
see if the board is seated.
• If processors were just added, be sure that
all processors on the board are the same
cache size and speed.
• Processors on board 2 may not be of the
same cache size or speed as processors
on board 1.
• Check connector for bent pins.
• If video is available, look for additional
information contained within the POST
error messages
Both processor board 1 and processor board 2
LEDs are illuminated. • Check the interconnect LEDs on the front
top edge of the power and media module to
see if the boards are seated.
• If processors were just added, be sure that
all processors on both boards are the same
cache size and speed.
HP ProLiant DL740 Server User Guide E-11
HP CONFIDENTIAL
Writer: Anna Roberts File Name: o-appe Troubleshooting Information.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:41 PM