Show.system – HP Surestore 64 Director Switch User Manual
Page 108

96 show
show.system
Syntax
system
Purpose
This command displays a set of system attributes.
Parameters
This command has no parameters.
Command Example
Root>
show system
Output
The system attributes are displayed as a table that includes the following properties.
Name
The system name as set in the config.system.name command.
Description
The system description as set in the config.system.description command.
Contact
The system contact as set in the config.system.contact command.
Location
The system description as set in the config.system.description command.
Date/Time
The system date and time as set in the config.system.date command.
Serial Number
The serial number for the system.
Type Number
The type number for the system.
Model Number
The model number for the system (for example, FC-64).
EC Level
The engineering change level installed.
Firmware Version
The current firmware version installed.
Beaconing
The enabled state of unit beaconing (true or false).