HP Surestore 64 Director Switch - Manual (Page 87)

perf 75
CLI Com
m
a
nds
perf.link
Syntax
link
Purpose
This command displays port link counters for all ports.
Parameters
This command has no parameters.
Command Example
Root> perf link
Output
The port link counter data is displayed as a table that includes the following properties.
Port The port number.
OLS In The number of offline sequences initiated by the attached N_Port.
OLS Out The number of offline sequences initiated by this director or switch port.
Reset In The number of link resets initiated by the attached N_Port.
Reset Out The number of link resets initiated by this director or switch.
Link Flrs The number of times the port has detected a link error resulting from an
invalid link state transition or timeout.
Sync Losses The number of times the port has detected a loss of synchronization timeout
while not in an offline or LF2 state.
Sig Losses The number of times the port has detected a loss of signal while not in an
offline or LF2 state.