HP Surestore 64 Director Switch - Manual (Page 44)

32 config
Command Example
Root> config security userRights administrator “Administrator” “new
password”
config.security.userRights.operator
Syntax
operator “username” “password”
Purpose
This command sets the name and password for operator-level access.
Parameters
This command has two parameters.
Command Example
Root> config security userRights operator “Operator” “newpassword”
username Specifies the new user name for operator-level login. Default is set to
Operator . This parameter is 1–15 characters. Valid characters include all
characters in the USASCII character set, excluding control characters and
spaces. Spaces are not valid even though quotation marks are used.
password Specifies the password for operator-level login. Default is set to password .
This parameter is 1–15 characters. Valid characters include all characters in
the USASCII character set, excluding control characters and spaces. Spaces
are not valid even though quotation marks are used.