Config.zoning.renamezoneset – HP Surestore 64 Director Switch User Manual
Page 67
config 55
CLI Com
m
a
nds
Description
Changes are not activated on the switch until the config.zoning.activeZoneSet command is
issued.
Parameters
This command has one parameter.
Command Example
Root>
config zoning deleteZone TheLeastUltimateZone
config.zoning.renameZoneSet
Syntax
renameZoneSet “zoneSetName”
Purpose
This command changes the name of the zone set in the work area.
Description
Changes are not activated on the switch until the config.zoning.activateZoneSet command
is issued.
Parameters
This command has one parameter.
zoneName
Specifies the name of the zone to be deleted.
zoneSetName
Specifies the new name for the zone set. The zoneSetName must contain
1-64 characters. Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz012345
6789$-^_
Spaces are not permitted, and the first character must be alphabetical.