HP Surestore 64 Director Switch - Manual (Page 71)

config 59
CLI Com
m
a
nds
Parameters
This command has two parameters.
Command Example
Root> config zoning deleteWwnMem TheNotSoUltimateZone 10:00:00:00:C
9:22:9B:AB
config.zoning.deletePortMem
Syntax
deletePortMem “zoneName” domainId portNumber
Purpose
This command deletes a domain ID and port number for a zone member in the specified
zone in the work area.
Parameters
This command has three parameters.
zoneName Specifies the name of the zone that contains the member to be deleted.
wwn Specifies the world-wide name of the member to be deleted from the zone.
The value of the WWN must be in colon-delimited hexidecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).
zoneName Specifies the name of the zone that contains the member to be deleted.
domainId Specifies the domain ID of the member that to be deleted from the zone. Valid
domain IDs are in the range 1–31.
portNumber Specifies the port number of the member to be deleted from the zone. Valid
port numbers values are:
0–64 for the FC-64