Show.port.config – HP Surestore 64 Director Switch User Manual
Page 98
Advertising
86 show
show.port.config
Syntax
config
Purpose
This command shows the port configuration for all ports.
Parameters
This command has no parameters.
Command Example
Root>
show port config
Output
The port configuration attributes are displayed as a table that includes the following
properties.
Port
The port number.
Name
The name of the port as set in the config.port.name command.
Blocked
The blocked state of the port as set in the config.port.blocked command.
Ext Dist
The extended distance state as set in the config.port.extDist command.
Type
The port type as set in the config.port.type command.
Advertising