HP 3PAR Operating System Software - Manual (Page 20)

2 Managing Ports
“Configuring Ports” (page 20)
“Clearing Port Parameters” (page 24)
“Editing a Port Label” (page 24)
“Resetting a Port” (page 24)
“Setting a Port Offline” (page 24)
“Initializing a Port” (page 25)
“Synchronizing a Port with the Name Server” (page 25)
“Issuing an LIP Command” (page 25)
“Enabling a Remote Copy Interface” (page 25)
“Disabling a Remote Copy Interface” (page 25)
“Pinging a Port” (page 26)
“Viewing System Ports” (page 26)
Configuring Ports
The HP 3PAR Management Console allows you to configure the following types of ports:
•
CNA
•
Fibre Channel
•
iSCSI
•
Remote Copy over Fiber Channel (RCFC)
•
Remote Copy over IP (RCIP)
To learn how to configure ports with the HP 3PAR Management Console, see the following:
“Configuring CNA Ports” (page 20)
“Configuring Fibre Channel Ports” (page 22)
“Configuring iSCSI Ports” (page 22)
“Configuring a Remote Copy over Fibre Channel Port” (page 23)
“Configuring a Remote Copy over IP Port” (page 23)
Configuring CNA Ports
To Configure a CNA port:
1.
In the Manager Pane, click Systems.
2. Open the System tree and select Ports.
3. Start the CNA Port Configuration wizard using one of the following methods. (CNA must be
supported and a CNA port present in the system for these actions to be available.)
Method 1 – In the CNA Summary tab in the Management Window, right click the CNA port
you wish to configure, then click Configure.
Method 2 – Select Configure CNA port in the Common Actions Panel.
Method 3 – Select a CNA port in the Management Window, then click Configure in the
Toolbar.
The CNA Port Configuration wizard appears.
20 Managing Ports