Receive a fax manually, Receive a, Fax manually – HP Officejet 7410 All-in-One Printer User Manual

Page 112: Receive a fax, Manually

Advertising
background image

Tip

You can also access two-sided printing for faxes by pressing

Setup

,

4

, and

then

6

.

3

Select one of the following options:

If you want to print on one side of the page, press

1

to select

1-Sided Output

.

If you want to print on both sides of the page, press

2

to select

2-Sided

Output

.

Note

If you select

2

, make sure you do not remove the pages from the output

tray before the HP all-in-one finishes printing the fax. The HP all-in-one
prints the front side of the page, places it in the output tray, and then
picks it back up to print the opposite side. After both sides of every page
have been printed, you can remove the fax.

4

Press

OK

.

The HP all-in-one uses this setting to print all faxes.

Receive a fax manually

If you set up your HP all-in-one to receive faxes manually (the

Auto Answer

light is off)

or you answer the phone and hear fax tones, use the instructions in this section to
receive faxes.
You can receive faxes manually from a phone that is:

Directly connected to the HP all-in-one (on the "2-EXT" port)

On the same phone line, but is not connected to the HP all-in-one

1

Make sure the HP all-in-one is turned on and you have paper loaded in the input
tray.

2

Remove any originals from the document feeder tray.

3

Set the

Rings to Answer

setting to a high number to allow you to answer the

incoming call before the HP all-in-one answers. Or, set your HP all-in-one to
answer faxes manually.
For information on setting the number of rings to answer, see

Set the number of

rings before answering

. For information on setting the HP all-in-one to answer

faxes manually, see

Set the answer mode

.

4

Do one of the following:

If your phone is on the same phone line (but not plugged into the back of the
HP all-in-one) and you hear fax tones from a sending fax machine, wait 5 - 10
seconds before pressing 1 2 3 on your phone. If the HP all-in-one does not
begin receiving the fax, wait several more seconds and press 1 2 3 again.

Note

When the HP all-in-one receives an incoming call, it displays

Ringing

on the color graphics display. If you pick up the phone,

Phone-Off

Hook

appears after a few seconds. You must wait until this message

appears before pressing 1 2 3 on your phone or you will not be able to
receive the fax.

If your phone is plugged directly into the back of the HP all-in-one and you
hear fax tones from a sending fax machine, press the

Start Fax Black

or

Start Fax Color

button on the control panel.

If you are currently on the phone with the sender using a phone connected to
the HP all-in-one, instruct them to press Start on their fax machine first. After

User Guide

109

Use the

fax

features

Advertising