HP Hitachi Dynamic Link Manager Software - Manual (Page 167)

3. Creating an HDLM Environment
143
Figure 3-5: Result of Executing vgdisplay -v (When There Are Two Physical
Volumes)
Check the shaded portion and confirm that
vg02
consists of
/dev/sde
and
/dev/
sdu
, both of which have been defined for the same device to be managed by HDLM.
(3) Setting in the syslogd Settings File
The log upon executing the installation is output to syslog. In Red Hat Enterprise
Linux, check the syslogd settings file (system log configuration definition file) and
make sure that it specifies that messages with an Error level or higher are to be output.
Figure 3-6: Example of the Contents of the syslogd Settings File (In Red Hat
Enterprise Linux) shows an example of the contents of the syslogd settings file.