HP Hitachi Dynamic Link Manager Software - Manual (Page 385)

4. HDLM Operation
361
In the above figure, new paths that have been added are indicated by shading.
Although the information about the old paths (underlined information) that were
placed in
Offline(C)
status before the HBAs were replaced remains, this
information will be deleted in step 8.
7. Execute the
dlmcfgmgr
utility (
dlmcfgmgr -v
) to confirm that new SCSI
devices have been added.
New SCSI devices that have been added are indicated by shading in the above
figure.
Although the information about the old SCSI devices (the underlined