HP Hitachi Dynamic Link Manager Software - Manual (Page 392)

4. HDLM Operation
368
be replaced (path that goes through the HBA to which the Fibre Channel switch
is connected).
For example, to place in Offline (C) status the path that goes through the HBA
with host port number
0001
and bus number
0000
, execute the following
command:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000
While the path that goes through the HBA with host port number
0001
is placed
Offline, the status of the path that goes through the HBA with host port number
0002
is Online.
Figure 4-5: When the Status of the Path That Goes Through the Fibre Channel
Switch to Be Replaced Is Offline(C)
2. Replace the Fibre Channel switch for the path that has been placed in Offline(C)
status.