HP Hitachi Dynamic Link Manager Software - Manual (Page 273)

3. Creating an HDLM Environment
249
When you use the
parted
command to change the partition, to let the
system recognize the partitions on the HDLM device, execute the
blockdev
command after the
parted
command.
3. Edit the
/etc/lvm/lvm.conf
file.
Edit the device section in the file as shown below to disable the SCSI device
configuration and enable the HDLM device configuration:
• Adding and deleting
filter
entry information
Add the following line and comment out all other
filter
entry information:
filter = [ "a|sddlm[a-p][a-p].*|", "r|/dev/sd|" ]