HP Hitachi Dynamic Link Manager Software - Manual (Page 674)

8. Messages
650
dlmcfgmgr
utility.
• Confirm that the user has write permission in the root directory (
/
).
dlnkmgr
:
• Confirm that HDLM has been configured.
• Take action according to the contents output in the log of the
dlmcfgmgr
utility.
• Confirm that the user has write permission in the root directory (
/
).
gzip
:
Confirm that that the unused capacity is sufficient at the creation destination
of the initial ramdisk image file.
mke2fs
or
touch
:
Confirm that the user has write permission in the root directory (
/
).
mkdir
:
Confirm that there is enough unused capacity and that the user has write
permission in the following directory:
•
/etc/opt/DynamicLinkManager
.
•
/opt/DynamicLinkManager
.
• The root directory (
/
)
mount
:
Confirm that there is unused capacity in the loop device.
umount
:
A temporary file remains, so do the following:
1.
Unmount
/etc/opt/DynamicLinkManager/tmp/initrdmnt.$$
($$ is a process ID).
2. Remove the
/etc/opt/DynamicLinkManager/tmp/
initrdmnt.$$
($$ is a process ID) file.
vol_id
:
Confirm that the file system is created in the root directory (
/
) indicated by
/etc/fstab
file.
Execute the
DLMgetras
utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM. For details on the
DLMgetras
utility, see 7.2 DLMgetras
Utility for Collecting HDLM Error Information.