HP Hitachi Dynamic Link Manager Software - Manual (Page 292)

3. Creating an HDLM Environment
268
3.16 Settings for VCS
The following is the procedure that must be executed by the user when HDLM is
installed in an environment that uses VCS. For details on how to operate the VCS GUI,
see the VCS documentation.
1.
Stop the cluster service of VCS.
2. Change the SCSI device used by VCS to an HDLM device.
Change the
Block Devices
parameter of the
Mount
resource from the SCSI
device to an HDLM device.
3. Start the cluster service of VCS.