HP Hitachi Dynamic Link Manager Software - Manual (Page 389)

4. HDLM Operation
365
Figure 4-2: System Configuration for Replacing a Fiber Cable (Explained in the
Following Steps)
To replace a fiber cable:
1.
Place in Offline (C) status the path that goes through the fiber cable to be replaced
(path that goes through the HBA to which the fiber cable is connected).
For example, to place in Offline (C) status the path that goes through the HBA
with host port number
0001
and bus number
0000
, execute the following
command:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000
While the path that goes through the HBA with host port number
0001
is placed
Offline, the status of the path that goes through the HBA with host port number
0002
is Online.