HP Hitachi Dynamic Link Manager Software - Manual (Page 415)

5. Troubleshooting
391
5.3 What To Do for a Path Error
When a path error is detected, HDLM performs a failover on the path and outputs the
KAPL08022-E message. This message indicates that an error has occurred in the
components that make up the path. Figure 5-1: Error Location When the
KAPL08022-E Message Is Output indicates these components.
Figure 5-1: Error Location When the KAPL08022-E Message Is Output
Figure 5-2: Troubleshooting Procedure When a Path Error Occurs shows the
troubleshooting procedure when the KAPL08022-E message is output.