HP Designjet T920 ePrinter series - Manual (Page 30)

● In the Embedded Web Server: select Setup > Internet connection.
●
Using the front panel: press , then , then Connectivity > Internet connectivity.
The following settings are available:
● Internet connection: The default value is Yes.
● Proxy > Enable proxy: Enable or disable a proxy server.
● Proxy > Proxy address: Enter the proxy address, empty by default.
● Proxy > Proxy port: Enter the proxy port number, zero by default.
● Proxy > Proxy authentication: Enable or disable authentication.
● Proxy > Restore factory settings: Return to the initial default settings.
If you have trouble with your Internet connection, see Cannot connect to the Internet on page 182 .
Configure firmware updates
You can choose from the Embedded Web Server or from the front panel whether and how to download
firmware updates.
NOTE: If an administrator password has been set, it will be required to change these settings.
● In the Embedded Web Server: select Setup > Firmware update.
● Using the front panel: press , then , then Updates > Firmware update.
The following settings are available:
● Check: If you select Automatically (the default setting), the printer will check automatically every week
(or after the printer has been restarted seven times, whichever happens first) whether new firmware is
available. If you select Manually, the printer will not check automatically; you can check manually
whenever you like.
● Download: If you select Automatically (the default setting), the printer will automatically download
new firmware whenever it becomes available. If you select Manually, you will be asked to approve each
download.
NOTE: Downloading the firmware does not mean that you have installed it in your printer. To install
the new firmware, you must confirm the installation manually.
● Firmware update information: Information about the firmware currently installed
● Firmware update history: A list of firmware versions that have been installed in the printer. It is usually
possible to reinstall the version immediately before the version that is currently installed, if you have
some problem with the current version.
Set remote printing preferences
At the front panel, press , then , then Setup > Printing preferences to define the default
properties of jobs sent to your printer from remote locations.
● Printer margins: Choose between Clip from contents and Add to content.
● Color: Choose between Color, Grayscale, and Black and white printing.
● Print quality: Choose between Best, Normal, and Fast.
22 Chapter 3 Setting up the printer ENWW