HP Designjet T920 ePrinter series - Manual (Page 74)

Alternatively, you can select from the custom options: Best, Normal and Fast. If you select Fast, you can also
select Economode, which uses a lower rendering resolution and consumes less ink. It therefore increases
printing speed even further, but reduces print quality. Economode can be selected only from the custom
options (not from the slider).
There is also two supplementary custom options that may have an effect on print quality: Maximum Detail
and More Passes. See High-quality printing on page 70 .
NOTE: In the Windows driver dialog, the rendering resolution for your job is displayed in the Custom Print
Quality Options dialog box (select Custom options and then Settings).
You can select print-quality options in the following ways:
● In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. If you
select Standard Options, you will see a simple slider with which you can select speed or quality. If you
select Custom Options, you will see the more specific options described above.
● In the Mac OS X Print dialog: go to the Paper/Quality panel and look at the Quality Options section. If
you select Standard quality options, you will see a simple slider with which you can select speed or
quality. If you select Custom quality options, you will see the more specific options described above.
● On the Embedded Web Server's Submit Job page (T1500 series): select Basic settings > Print quality.
If you then select Standard options, you can choose between Speed and Quality. If you select Custom
options, you will see the more specific options described above.
●
Using the front panel: press , then , then Setup > Printing preferences > Print quality.
NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front
panel.
NOTE: You cannot change the print quality of pages that the printer is already receiving or has already
received (even if they have not started to print yet).
Select paper size
The paper size can be specified in the following ways.
NOTE: The paper size specified here should be the paper size in which the document was created. It is
possible to rescale the document to a different size for printing. See Rescale a print on page 69 .
● In the Windows driver dialog: select the Paper/Quality tab, then select your paper size from the
Document Size list.
● In the Mac OS X Print dialog: select your printer, then select your paper size from the Paper Size list.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
● On the Embedded Web Server's Submit Job page (T1500 series): select Advanced settings > Paper >
Page size > Standard.
●
Using the front panel: press , then , then Setup > Printing preferences > Paper options >
Paper size.
NOTE: If the paper size is set from your computer, it overrides the paper size setting in the front
panel.
Custom paper sizes
If you want to choose a paper size that is not included in the list of standard paper sizes, there are various
different ways to specify it.
66 Chapter 8 Printing ENWW