HP Designjet T920 ePrinter series - Manual (Page 73)

● TIFF
● JPEG
● PDF (PostScript printers only)
● PostScript (PostScript printers only)
NOTE: When you print to a file, the file should be in one of the above formats, but its name may have an
extension such as .plt or .prn.
If the files are not in one of these formats, they will not be printed successfully.
If the jobs have been generated with the appropriate settings (such as page size, rotation, resizing and
number of copies), you can just press the Print button and they will be sent to the printer.
If you need to specify printing settings, go to the Job settings section and select the options you need. Each
option has explanatory text on the right, so that you can understand the behavior of each setting. Remember
that, if you leave the setting as Default, the setting saved in the job will be used. If the job contains no
setting, the setting in the printer will be used.
If you have chosen some non-default settings and expect to reuse the same group of settings in the future,
you can save them all under a single name from the Manage presets tab, and recall them using that name
later.
Print from a computer using a printer driver
This is the traditional way of printing from a computer. The correct printer driver must be installed on the
computer (see Installing the software on page 14 ), and the computer must be connected to the printer by
network.
When the printer driver has been installed and the computer is connected to the printer, you can print from a
software application by using the application's own Print command and selecting the correct printer.
NOTE: When first printing, Windows automatically searches for the printer driver on the Internet (if the
computer is connected to the Internet). This means that you do not need to search for the driver yourself.
However, this process will install the driver without the rest of the software. Therefore, we recommend
installation using the DVD (or the install package that you can download from HP's website) so that all of the
printer software is installed.
Advanced print settings
The rest of this chapter explains the various print settings that you can use when printing with a printer
driver, the Embedded Web Server or the HP Utility. These methods offer a relatively large number of settings
in order to satisfy all requirements.
TIP: In general you are recommended to use the default settings unless you know that they do not meet
your requirements.
TIP: If you intend to reuse a particular group of settings repeatedly, you can save those settings under a
name of your own choice and recall them later. A saved group of settings is known as a 'quick set' in the
Windows printer driver, and as a 'preset' in the Embedded Web Server.
Select print quality
The printer has various print-quality options because best-quality printing requires some loss of speed, while
fast printing implies some reduction in print quality.
Therefore, the standard print-quality selector is a slider that allows you to choose between quality and
speed. With some paper types, you can choose a compromise position between the two.
ENWW Print from a computer using a printer driver 65