HP Integrity NonStop H-Series - Manual (Page 101)

LMM GUI Operations
Library Media Manager Installation and User’s Guide— 529970-001
6- 15
Media Labeling Tab
Figure 5-12 appears.
In this example, you can see that three tapes were selected to be labeled as
BACKUP: 000011, 000021, and 000022. See
Figure 5-10 on page 6-13. In
Figure 5-12 , notice on the right side of the dialog box that tape 000011 is being
labeled because it was the first tape selected. If you check the Queue Manager
Tab , you will see that the other two tapes are queued to be labeled. You can also
check the EMS Log Tab to view the event messages as they occur.
Figure 5-12. Initializing Volume Label
View the Status
of the current
operation
Tapes are
labeled
in the order
they were
selected