HP Integrity NonStop H-Series - Manual (Page 167)

Library Media Manager Installation and User’s Guide— 529970-001
D- 1
D
Interfacing to LMM
Command Outputs
This section describes how to structure interprocess commands for use within the
Guardian operating system. Any byte that is not specified with data (an empty byte)
should be specified as a space (see
Examples of Structure ).
Mount Media Command
The Mount Media command is used to mount the specified media, by media label to a
transport. To request a specific drive include the Guardian name for the Drive (example
$TAPE1) within the mount request. If no tape drive name is specified, the tape label
will be mounted in the first available drive, if any. If no drive is available, the request is
placed in a queue. For details, see
Table D-2 .
Table D-1. Detail Command Byte Structure
Argument No. of Bytes
Command 2
Device Node 10
Device Name 10
Label 8
Drive Node 10
Drive Name 10
Res. 1 20
Res. 2 10
Res. 3 6
AltField 1 10
AltField 2 10
AltField 3 10
AltField 4 10
ErrorCode 2