HP Integrity rx4610 Server User Manual
Page 114
Chapter 9
Connecting the Monitor, Keyboard, and Mouse
106
Use this procedure to connect the peripheral control devices and monitor to the
HP Server:
CAUTION
The Keyboard and Mouse ports are both PS/2 ports, but are
not interchangeable. If you plug the keyboard into the Mouse
port, or the mouse into the Keyboard port, you will get an
error message and the system will not finish the boot process.
1. Connect the monitor, keyboard, and mouse to the HP Server using the
connections provided on the rear of the chassis. See Figure 9-1.
NOTE
The two USB connectors are reserved for printers, scanners,
and external modems, but not the keyboard or mouse.
If you have a console switch box, refer to the switch box's user
guide for instructions on connecting the keyboard, mouse, and
monitor.
2. If a LAN connector is provided, you may connect it now, or wait until you
have verified the HP Server's operation.