HP Integrity rx4610 Server - Manual (Page 62)

Chapter 6 Installing an Additional Processor
54
• The processors must operate at the designated speed stated by the product
type on the processor.
• If the server has two processors, they must reside on the top half of the
Processor/Memory Complex.
z
Use only processor upgrade kits with the same HP product number.
This ensures the processor type, clock speed, and cache sizes are the same.
Figure 6-1. System Board Set
Removing the CPU Thermal Dummy
CPU thermal dummies must be installed where a processor is absent to properly
direct cooling airflow. Therefore, the CPU thermal dummy must be removed
before installing an additional processor.