HP Designjet 700 Printer series - Manual (Page 178)

9-22
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 9-22 (seq: 176)
This is the black on page 9-22 (seq: 176)
If a “System Error” Message Is Displayed
Press Enter . If the message does not clear, turn the printer off, then on again to
try to clear the error message. If media appears to be jammed, clear it. If the
message is still displayed, record the alphanumeric code and have the printer
serviced. Report the code to the service technician; knowing the code number
will help the technician resolve the problem.
If an “Out Of Memory/Data Was Lost” Message Is Displayed
The current file is too large for the printer’s memory.
File Size and Memory Usage
There is no direct relationship between file size on your computer and memory
used in the printer to print that file. In fact, because of file compression (and
general complexity) it is often impossible to estimate how much memory will be
used. In general, thicker lines (
 0.5 mm), complex objects (such as polylines)
and fills will all use significantly more memory.
This also means that size of the largest file you can store in the printer’s queue is
not the same thing as the amount of memory installed in your printer.
Two tips for PostScript users with file-size problems:
Try reducing the page size in your software and then scale the print in the
printer’s front panel. See page 4-13.
Try reducing the resolution of any bit-map objects in your file, for example
photographs.
Troubleshooting
Solving Front-Panel Problems