HP Designjet 700 Printer series - Manual (Page 53)

1-35
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 1-35 (seq: 51)
This is the black on page 1-35 (seq: 51)
Other Applications
If you are going to use applications other than AutoCAD, Microsoft Windows or
Macintosh applications, first check any Software Application Notes supplied with this
printer, to see if the application is covered there. If not, here is some general advice.
The device list in your software may not be up to date with the latest printers
available. If the HP DesignJet 755CM is not quoted by name in your application’s
device list, select an alternative printer as follows:
This table does not apply to PostScript files.
Preference Device Comments
1 HP DesignJet 750C
2 HP DesignJet 350C or
HP DesignJet 330
3 HP DesignJet 250C or
HP DesignJet 230
4 HP DesignJet 220
5 HP DesignJet 650C With a preference for
C2858B/C2859B rather
than C2958A/C2859A
6 HP DesignJet 200
7 HP DesignJet 600 or
HP DesignJet
8 HP-GL/2 Device or a similar option including
a reference to HP-GL/2
9 HP 7600
10 HP 7595B DraftMaster SX or
HP 7596B DraftMaster RX or
HP 7599A DraftMaster MX or
HP 7595C DraftMaster SX Plus or
HP 7596C DraftMaster RX Plus or
HP 7599B DraftMaster MX Plus
11 HP 7586B If you choose these
devices you may not be
able to use your plotter’s
12 HP 7580 or
HP 7585
able to use your lotter s
parallel connection –
depending on the
application software.
The devices in the gray boxes support only HP-GL. The others all support
HP-GL/2 and HP-GL.
Setting Up the Printer
Task 8: Set Up Your Software
SETUP
1
PS