HP Designjet 700 Printer series User Manual
Page 41
1-23
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 1-23 (seq: 39)
This is the black on page 1-23 (seq: 39)
3
The
Receiving
light flashes while the file is being processed, and then the printer
starts printing. After it has finished:
On roll media, the printer waits for the ink to dry, if necessary, and drops the
page into the media bin.
On sheet media, wait until the ink is dry, if necessary (see the front-panel
display for an ink-drying message), and then gently pull the sheet from the
printer. On HP Coated Paper, you don’t need to wait at all.
4
Examine the print, with the following questions particularly in mind:
Are the lines clean and complete?
Are the area fills smooth?
Is the color of good quality?
Unless you changed it, the print-quality setting on the front panel was
Best
. If you
have any concerns about the print quality of the sample files, use the
troubleshooting advice starting on page 9-16.
Setting Up the Printer
Task 5: (Optional) Print a Demo
SETUP
1