HP Designjet 700 Printer series User Manual
Page 186
10-4
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 10-4 (seq: 184)
This is the black on page 10-4 (seq: 184)
Message
Explanation and
Action
Service cartridges
Continue
!
Cartridge Check is on and an error has been detected.
Press
↑
if you want to
service the cartridges (replace or reseat). Press
↓
if you want to continue without
servicing the cartridges.
Sheet load
!
Roll load
!
Press
↑
to load sheet media.
Press
↓
to load roll media.
Sheet misaligned
Reload sheet
Sheet media is skewed.
Remove it and reload it so that the left and right edges
being loaded into the printer are square. The leading edge must also be straight.
Sheet / Roll?
Reload media
D
Either: You have chosen Sheet mode while loading roll media.
Reload media.
D
Or: You have loaded a sheet more than 51 inches (130 cm) long.
Trim sheet
and reload.
STATUS
Accessing cartridges
You have pressed the
Access cartridges
button. The cartridge carriage is moving
out so you can access it.
STATUS
Aligning cartridges
The printer is aligning cartridges.
STATUS
Cancelling
You have pressed the
Cancel
button and the printer is in the process of cancelling
the procedure.
Continue when this message is no longer displayed.
STATUS
Checking media
The printer is checking to see if media is properly positioned with respect to the
perforated line of the entry platen.
STATUS
Creating pattern
The printer is performing accuracy calibration.
STATUS
Ink drying (xx m xx s)
The ink on your print is drying.
Wait before removing the print. If you remove it
before the indicated time has passed, avoid smearing the ink.
STATUS
Loading roll
The printer is loading roll media.
STATUS
Loading sheet
The printer is loading sheet media.
STATUS
Maintenance advised
You are using the printer more intensively than the recommended duty cycle and
should
contact your local HP dealer or HP service engineer to arrange a service.
For the duty cycle specification, see page 11-4. If you choose to ignore the
message, you may continue to use the printer as normal, but may encounter a
number of operational or print-quality problems.
STATUS
Measuring pattern
The printer is measuring the accuracy calibration print you just loaded.
Front-Panel Messages