HP Designjet 700 Printer series - Manual (Page 51)

1-33
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 1-33 (seq: 49)
This is the black on page 1-33 (seq: 49)
Typical Checklist of Tasks to Set Up Your Software
1 Identify which driver you need.
Some are supplied with this printer, as listed in the table on page 1-34. Others are
supplied with your application software.
2 If necessary, install the driver on your computer.
3 Add this printer to the device list in the software (Done as part of the installation
routine with the PostScript driver.)
This list may be accessed, for example, through Printer type (in Macintosh
applications), Printer setup (in Microsoft Windows applications) or CONFIG / Add
a Printer (in AutoCAD). In most cases, you don’t need to add the printer for each
individual software application, but, for example, just once for all Microsoft
Windows applications.
4 Install any extra color management software on your computer.
For example, you may want to install the software in the Color Management Kit
supplied with this printer, in order to be able to print simulations of PANTONE
colors. How to do this is explained in the documentation included in the kit.
5 Configure the driver and any color management software.
This usually involves a series of dialog boxes where you can specify such items as
default media type, print quality etc.
IMPORTANT In most cases these settings will override any settings you make on the front panel
of the printer.
Setting Up the Printer
Task 8: Set Up Your Software
SETUP
1