Task 9: print a test file – HP Designjet 700 Printer series User Manual
Page 54
1-36
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 1-36 (seq: 52)
This is the black on page 1-36 (seq: 52)
Task 9: Print a Test File
The sample files explained in task 5 simply verify the operation of the printer
itself. Having connected the printer to your computer and configured the drivers or
other software for your requirements, you should now be in a position to send a
test using one of your own files.
Among the points you should be looking out for are:
Did the
Receiving
light on the front panel come on?
Do you see any error message on the front-panel display?
Does the image appear in the size, orientation and position on the sheet that you
expected?
Is any of the image clipped?
Are the lines of the correct width?
Are the colors an exact representation of what you expected?
If you find any problem at all, start by consulting chapter 9 of this manual,
“Troubleshooting.” There you will find advice on many different types of
problems, from obtaining no output at all, to tracking down the reason for a
specific print-quality issue. In case you do not solve your problem with the
information supplied there, chapter 9 also contains advice on where else to turn for
help.
Setting Up the Printer
Task 9: Print a Test File