HP Modular Cooling System - Manual (Page 21)

Web interface 21
• Date/Time—The date and time at which the event occurred
On the Event Log screen:
• (Admin only) Click Clear Event Log to clear the log files. This function clears all of the log files, and
there is no way to recover the data after it is cleared.
• Click Refresh to update the screen with current log information.
Setup tab
Menu options listed under the Setup tab include:
• Cooling System menu (" Cooling System " on page 21 )
• General menu (on page 31 )
• Network menu (on page 32 )
• Management menu (on page 33 )
• Accounts menu (on page 36 )
• Configuration Save/Restore menu (on page 37 )
These menu options enable the Admin to configure the settings for the management module. The Setup
tab and all menu options are not available to User accounts.
Cooling System
Click Cooling System in the left navigation frame to access the Cooling System screen. This screen enables
the Admin to configure cooling system settings for the management module.
The Cooling System screen contains the following:
• Intake Temp tab (on page 22 )
• Alarms/Warnings tab (on page 27 )
• Advanced tab (on page 28 )
• Timers tab (on page 30 )