HP Modular Cooling System - Manual (Page 24)

Web interface 24
3. Select Save Settings.
Remote Access tab
This screen enables the Admin to enter information for remote access to the management module.
To enable SSL:
1. Select to enable SSL using the SSL radio button.
2. Click Save Settings. A new HTTPS URL appears on the operator display.
3. Log in to the web interface using the new IP address or hostname (using the
https://
hostname[:port number] format).
4. Enter the port number to use HTTPS in the HTTPS Port field.
A default self-signed SSL certificate can be used, or you can enter your own certificate. The default
certificate is used if another certificate is not entered.
You can also enter your own SSL and private keys in the following format: