System information tab, Trap receivers tab – HP Modular Cooling System User Manual
Page 34
Web interface 34
•
Trap Receivers tab (on page
•
SNMP Managers tab (on page
•
Remote Access tab (on page
System Information tab
This screen enables the Admin to enter contact information for the management module. The information
entered on this screen appears on the Identification screen and is included with SNMP traps sent by the
management module.
To enter the contact information:
1.
Enter the name of the management module in the System Name field.
2.
Enter the name of the contact person in the System Contact field.
3.
Enter the name of the location in the System Location field.
4.
Enter the Read community string.
5.
Enter the Write community string.
6.
Enter the Trap community string.
7.
Do one of the following:
o
Click Save Settings to save the information.
o
Click Cancel to undo the changes.
Trap Receivers tab
This screen enables the Admin to enter information for servers that should receive SNMP traps from the
management module.