Automatic door release kit – HP Modular Cooling System User Manual
Page 29
Web interface 29
Automatic Door Release Kit
To view the HP Automatic Door Release hardware installation instructions, see the HP Modular Cooling
System G2 Automatic Door Release Installation Instructions.
To enable the automatic door release:
1.
Click Setup>Advanced.
2.
Select Enable in the Emergency Door Opening field.
When the function has been enabled, an indicator will appear on the Home tab showing the current
status of the rack doors. Also, a new button will appear on the Advanced tab allowing you to test the
feature.
To test the Automatic Door Release feature:
1.
Click the Door Opening Test button at the bottom of the screen. A new screen will appear.
2.
Choose one of the following:
•
To begin the test and open the rack doors, click OK.
•
To return to the Advanced screen, click Quit.