HP XP RAID Manager Software - Manual (Page 186)

186 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
If you specify –nowait –fq QM-Cnt shows the number
of remaining Q-markers in the CT group.
If you specify –nowait –m marker –fq QM-Cnt shows
the number of remaining Q-markers from the specified
marker in the CT group.
If you do not specify –nowait and the display status is
“TIMEOUT” QM-Cnt shows the number of remaining
Q-markers at timeout.
If the status for the Q-market is invalid (“BROKEN” or
“CHANGED”) QM-Cnt will show as “-”.
To determine the remaining data in the CT group:
Remaining data in CT group = Side File capacity *
Side File percentage / 100
The side file percentage is the rate shown under the
“%” column by the pairdisplay command.
The side file capacity is the capacity within 30-70% of
the cache setting as the side file.
To determine the average data per Q-marker in the CT
group:
Data per Q-Marker = Remaining data in CT group
/ QM-Cnt
–g group Used to specify a group name that is defined in the
configuration definition file.
The command is executed for the specified group
unless the –d pair_vol option is specified.
–h Displays Help/Usage, and version information.