HP Photosmart Pro B8353 Printer - Manual (Page 115)

Resolving borderless printing problems
● Check the print settings
1. Open the printer driver (see Printing a document ).
2. On the Features tab (Windows) or the Paper Type/Quality panel (Macintosh), check the following
settings:
● Verify that the paper size specified in the driver matches the size of the paper loaded in the input
tray.
● Select the appropriate paper type.
Streaks appear in a light portion of a printout
If streaks appear in a light portion approximately 63.6 mm (2.5 inches) from one of the long edges of a
photograph, try the following:
● Install a photo print cartridge (see Inserting the print cartridges ).
● Clean the print cartridges (see Cleaning the print cartridges ).
Image is printed at an angle
● If paper is twisting as it feeds or margins appear crooked, make sure the paper width guide and
tray extension fit against the edges of the paper.
● Printing with a single print cartridge
To do borderless printing with a single print cartridge, the tri-color print cartridge must be installed.
See
Printing with a single print cartridge .
ENWW Resolving borderless printing problems 105