HP PSC 1610v All-in-One Printer - Manual (Page 30)

Load other types of paper
The following table provides guidelines for loading certain types of paper. For best
results, adjust the paper settings each time you change paper sizes or paper types.
For information on changing paper settings, see the onscreen HP Image Zone Help.
Note Not all paper sizes and paper types are available with all the functions
on the HP All-in-One. Some paper sizes and paper types can only be used if
you are starting a print job from the Print dialog box in a software application.
They are not available for copying or printing photos from a memory card or
digital camera. Papers that are only available for printing from a software
application are indicated as such.
Paper Tips
HP papers ● HP Premium Paper: Locate the gray arrow on the nonprinting side
of the paper, and then slide the paper into the paper tray with the
arrow side facing up.
● HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip (with arrows and the HP logo) is on top
and is going into the paper tray first. For printing from a software
application only.
Note The HP All-in-One cannot automatically detect transparency
film. For best results, set the paper type to transparency film
before printing or copying onto transparency film.
● HP Iron-On Transfers: Flatten the transfer sheet completely before
using it; do not load curled sheets. (To prevent curling, keep
transfer sheets sealed in the original package until you are ready
to use them.) Locate the blue stripe on the nonprinting side of the
transfer paper and then manually feed one sheet at a time into the
paper tray with the blue stripe facing up. For printing from a
software application only.
● HP Greeting Cards, HP Photo Greeting Cards, or HP Textured
Greeting Cards: Insert a small stack of HP greeting card paper into
the paper tray with the print side down; slide the stack of cards
forward until it stops. For printing from a software application only.
Labels Always use letter or A4 label sheets designed for use with HP inkjet
devices (such as Avery inkjet labels), and make sure that the labels are
no more than two years old. Labels on older sheets might peel off
when the HP All-in-One, causing paper jams. For printing from a
software application only.
1.
Fan the stack of labels to make sure none of the pages are
sticking together.
2. Place a stack of label sheets on top of full-size plain paper in the
paper tray, label side down. Do not insert labels one sheet at a time.
User Guide 27
Load
originals
and
load
paper