HP PSC 1610v All-in-One Printer - Manual (Page 85)

cartridge installed, you have a six-ink system, which provides enhanced quality color
photos.
When you want to print regular text documents, swap the black print cartridge back in.
Use a print cartridge protector to keep your print cartridge secure when it is not being
used.
●
For more information on purchasing a photo print cartridge, see Order print
cartridges .
● For more information on replacing print cartridges, see Replace the print cartridges .
● For more information on using the print cartridge protector, see Use the print
cartridge protector .
Use the print cartridge protector
In some countries/regions, when you purchase a photo print cartridge, you might also
receive a print cartridge protector. In other countries/regions, a print cartridge
protector comes in the box with your HP All-in-One. If neither your print cartridge nor
your HP All-in-One came with a print cartridge protector, you can order one from HP
Support. Go to
www.hp.com/support .
The print cartridge protector is designed to keep a print cartridge secure and prevent it
from drying out when it is not being used. Whenever you remove a print cartridge from
the HP All-in-One with the intention of using it again later, store it in the print cartridge
protector. For example, store the black print cartridge in a print cartridge protector if
you are removing it so you can print high-quality photos with the photo and tri-color
print cartridges.
To insert a print cartridge into the print cartridge protector
1.
Slide the print cartridge into the print cartridge protector at a slight angle and snap
it securely into place.
2. Store the print cartridge protector in the print cartridge storage area of the HP All-
in-One for safe keeping. Open the print-carriage access door and place the print
cartridge protector in the device, as shown below.
Chapter 12
82 HP PSC 1600 All-in-One series
Maintain your HP
All-in-One